Home > Caterpillar > Engine Kits/Parts >

IPD 3406C Enhanced Durability Kit
IPD 3406C Enhanced Durability Kit


 
Our Price: $3,500.00


Product Code: KIF8869-272-CS


Main Bearing Size:

Rod Bearing Size:

Qty:  
Description
 
3406C 1 piece aluminum piston to a 2 piece piston design with a steel crown for enhanced durability. This kit is a 14.6:1 compression ratio.

To make this kit work properly in a 3406C on highway engine, the single tube cooling jets need to be upgraded to dual tube cooling jets. As well as, the oil pump pressure spring retainer. See notes below for parts numbers.


Kit Includes:
  • (6) Pistons with Skirts/Piston Pins/Rings
  • (6) Liners with Crevice Type Seal
  • (7) Main Bearings
  • (1) In-frame Gasket Set
  • (1) Thrust Bearing
  • (6) Rod Bearings
Note: You must increase oil pump relief valve pressure setting on your existing 480 kPa (70 psi) engine oil pump by replacing the 9Y-1800 Retainer with a new 9Y-1792 Retainer.

Note: There are two different sizes of cooling jets. Use the 166-3650 Piston Cooling Jet and the 111-8606 Special Bolt for a 3/8-16-2A thread hole. Use the 277-3076 Oil Jet Tube As and the 151-5925 Bolt for a 7/16-14-2A thread hole.

Warranty:
No Warranty offered with this product. Off Highway Use Only.

Shipping:
TBD