Caterpillar truck parts, enhanced power products, enhanced power product

C15 ACERT ROCKER ARM SET

Complete new set of C15 acert rocker arms with both valve and injector rockers. Made with premium hardened rollers, comes with new adjuster screw and nut.

Qty-6 (278-1363) Acert injector rocker arm
Qty-12 (276-4132) Acert valve rocker arm

$2,422.00

C15 Acert Valve Rocker Arm

KEY FEATURES & ADVANTAGES

Unmatched Durability: Built to handle high stress and wear, ensuring long-lasting performance under the most demanding conditions.
Precision Engineering: Exacting tolerances guarantee improved valve timing and smoother, more efficient engine operation.
Factory Fit & Form: Designed specifically for CAT C15 Acert (MXS, NXS, SDP models), providing a seamless swap without hassle. Easy to Install.
Reduced Downtime: High-strength construction means fewer failures, fewer shop visits, and more money in your pocket.

TECHNICAL SPECIFICATIONS

Part Number: 276-4132 (Arm AS-V ROC)
Application: CAT C15 Acert Intake/Exhaust
Requirement: Engine requires 12 units for full coverage
Material: High-Strength Forged Alloy

Built to handle high stress and wear for long-lasting performance. Transfer motion from the camshaft to open and close engine valves.

$145.00

C15 BIG BORE KIT/ HIGH PREFORMANCE

The ultimate overhaul kit for your C15 Acert C15 Acert to 16.8L

No modifications to your block, use your stock Acert rods and these custom cylinder packs to turn your C15 into a C17 engine! These kits have been extensively tested in the harshest conditions before being sold to the public, so that you, the customer can rely on another top quality product from IPD. This kit from us will offer everything you need to do an in-frame on the truck, leaving no room for guesswork when installing this engine kit.

Customers that have installed these kits report that they have had increased fuel milage, increased torque, and a decrease in cooling system temperature. IPD has done some serious improvements to the liners in these kits vs the original equipment. Moving away from the traditional high carbon steel liner and upgrading to a chromoly liner with added molybdenum to prevent liner issues that the C18's were known to have.

This Kit Contains:

2502940 – RETAINER, PISTON PIN (x 12)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

C15011NLS – GASKET SET, OUT-OF-FRAME 48 (x 1)

C18RS1 – RING SET (x 6)

IPDC15BB – C15 BIG BORE PISTON (x 6)

2613450 – CON ROD BEARING STD (x 6)

5245565 – PISTON PIN (x 6)

1685248 – SEAL-ISOLATION (x 1)

LINER SPECIAL WITH SEALS (x 6)

This kit requires a piston cooling nozzle 274-8359 to match the piston cooling hole in the bottom of the piston and wrist pin location. If the cooling nozzles are not changed damage may occur.

These kits are special order and stock varies, these kits have been in high demand and keeping them in stock has been challenging. PLEASE CALL BEFORE ORDERING!

These kits are for off road and performance use only.

There is no warranty for this specific kit.

$7,600.00

$6,999.00

C15/3406E 1 Piece Exhaust Manifold Kit

Upgrade your exhaust system with high-quality Caterpillar exhaust manifolds from Enhanced Power Products. If you need durable and efficient diesel engine parts, our manifolds are key CAT performance parts designed specifically for your CAT 3406E or C15 truck engine.

The exhaust manifold is critical for efficiently channeling hot gases from the cylinders to the turbocharger. Our manifolds are built with superior characteristics, featuring heavy-duty construction and precision machining to prevent cracking, warping, and leaking, common issues with inferior caterpillar engine parts. This robust design ensures an optimal seal and consistent gas flow, which is essential for maximizing turbocharger spool-up and power output.

Cracking Elimination: This black ceramic, one-piece design removes the slip joints that often leak or fail, providing a permanent solution to common exhaust issues.
Superior Metallurgy: Cast from high-silicon ductile iron, this manifold resists extreme thermal cycling and prevents the warping found in stock units.
Improved Turbo Spool: The smooth internal runners enhance exhaust flow velocity, allowing your turbocharger to respond faster under heavy loads.

Selecting the right C15/3406E 1 piece Exhaust Manifold Kit from Enhanced Power Products is the best way to ensure your engine breathes efficiently. When you shop for Caterpillar parts online, you need CAT engine parts that can survive the heat. This kit is best for the long-haul trucking industry, heavy construction fleets, and agricultural operators who demand maximum durability and zero downtime from their equipment.

By reducing backpressure and improving exhaust scavenging, our manifolds contribute directly to better engine breathing and fuel efficiency. When you shop for semi truck parts online, choose our heavy diesel specialists for reliable components that deliver long-term performance and help reduce maintenance downtime for your commercial vehicle.

Every manifold comes with a complete install kit that has all the gaskets and supplies to install the manifold and turbo. This is something nobody else in the industry offers standard which saves our customers money and time from having to source the parts separate.

Complete Hardware Kit: Each manifold comes with high-strength mounting studs and premium gaskets to ensure a perfect, leak-free seal during installation.
Enhanced Port Matching: Precision-machined flanges ensure an exact fit to your cylinder head, maximizing the efficiency of your Cat exhaust manifolds.
Lower EGTs: By optimizing exhaust gas scavenging, this kit helps lower operating temperatures, making it a vital part of your Cat engine performance parts collection.

Optional Kit Add On:

Exhaust Manifold Service Kit that includes:
- STUD, TAPER LOCK (1061792) Qty- 11
- STUD, TAPER LOCK (1061793) Qty- 1
- SPACER (1064159) Qty-1
- SPACER (1083612) Qty-11
- SEAL (1262702) Qty-1
- GASKET (1978418) Qty-1
- GASKET (1978419) Qty-1
- SEAL, TURBO OIL LINES (1986068) Qty-1
- GASKET (1S4295) Qty-1
- BOLT (2N2765) Qty-4
- LOCK, NUT (2N2766) Qty-16
- WASHER, HARDENED (5M2894) Qty-12

Buy today while they are in stock!

$1,458.00

Cat C15 Acert BXS Camshaft

Forged from Billet Steel: Forget weak cast iron. This cam is forged from high-strength steel for maximum resistance, superior fatigue life, and absolute toughness. New camshaft, not reman.
Precision-Ground Performance: Every lobe and journal is precision-ground to meet or exceed strict OEM specs, ensuring perfect timing and reduced friction.
Workhorse Proven: Specifically engineered to handle the brutal, high-performance demands of Caterpillar C/15 BXS diesel engines under heavy load.
Restore Raw Power: Fixes worn lobes, eliminates misfires, and brings back that lost horsepower and fuel efficiency.

Our performance camshaft is engineered to deliver a higher level of power and durability than standard OEM parts. Designed as a direct, drop-in replacement, this upgraded component ensures perfect fitment for easy installation while simultaneously extending the service life of your Caterpillar C15 Acert BXS diesel engine. Upgrade today for superior reliability and performance.

$1,100.00

Cat SDP Camshaft

Forged from Billet Steel: Forget weak cast iron. This cam is forged from high-strength steel for maximum resistance, superior fatigue life, and absolute toughness. New, not reman.
Precision-Ground Performance: Every lobe and journal is precision-ground to meet or exceed strict OEM specs, ensuring perfect timing and reduced friction.
ACERT Workhorse Proven: Specifically engineered to handle the brutal, high-performance demands of SDP engines under heavy load.
Restore Raw Power: Fixes worn lobes, eliminates misfires, and brings back that lost horsepower and fuel efficiency.

Our performance camshaft is engineered to deliver a higher level of power and durability than standard OEM parts. Designed as a direct, drop-in replacement, this upgraded component ensures perfect fitment for easy installation while simultaneously extending the service life of your Caterpillar C15 Acert diesel engine. Upgrade today for superior reliability and performance.

$1,100.00

CATERPILLAR C15/3406E CRYO TREATED HEAD BOLT KIT

Achieving the ultimate clamp load for your high-performance build requires the uncompromising strength of the CATERPILLAR C15/3406E CRYO TREATED HEAD BOLT KIT from Enhanced Power Products.

Cryogenic Strengthening: Each bolt undergoes a deep-freezing process that realigns the molecular structure, significantly increasing tensile strength and fatigue resistance.
Precision Threading: The threads are rolled after heat treatment to ensure maximum consistency and to prevent the galling often seen in standard Cat head bolt kit options.
Corrosion Resistance: A specialized protective coating is applied to every fastener to prevent rust and ensure easy removal during future maintenance cycles.

When you are sourcing Caterpillar parts online, you need hardware that can withstand the extreme cylinder pressures of a modified diesel engine. These CAT engine parts are designed to eliminate bolt stretch, which is the primary cause of head gasket failure in heavy-duty applications. By choosing these Cat engine performance parts, you are investing in a fastener that maintains its torque-to-yield integrity longer than traditional OEM hardware. Enhanced Power Products provides this kit to ensure your 3406E or C15 remains sealed under the most demanding boost levels. Order today.

Eliminates Gasket Leaks: The superior clamping force prevents the head from lifting, providing a permanent seal for your combustion chamber.
Reusable Durability: Unlike standard bolts that must be discarded, the cryo-treatment process allows for a more stable fastener that resists permanent deformation.
Professional Grade: This kit is the preferred choice for heavy-haulers and tractor pullers who push their Caterpillar engines to the absolute limit.

$625.00

CATERPILLAR C15/3406E HEAD BOLT KIT

Achieving the ultimate clamp load for your high-performance build requires the uncompromising strength of the CATERPILLAR C15/3406E HEAD BOLT KIT from Enhanced Power Products.

$300.00

CON ROD BEARING STD

IPD Brand connecting rod bearings provide oil film stability for reliable bottom-end protection. Supporting the immense force of the piston's downward stroke requires the uncompromising strength of the Con Rod Bearing STD from Enhanced Power Products. If you are searching for Caterpillar parts online, you know that the connecting rod interface is one of the most high-stress points in your entire engine. These Cat bearings are engineered to absorb the shock of combustion while protecting your crankshaft journals from scoring and heat damage. As essential CAT engine parts, they are built to withstand the rigorous demands of heavy-duty diesel cycles, ensuring your rods swing smoothly mile after mile. By integrating these Cat engine performance parts into your rebuild, you are choosing a component that prioritizes fatigue resistance over everything else. Enhanced Power Products provides these standard-sized bearings to ensure your engine maintains its factory-spec clearances and stays out of the repair shop.

KEY FEATURES & ADVANTAGES

Tri-Metal Construction: These bearings utilize a sophisticated layering of steel, copper-lead, and tin to provide an ideal balance of strength and surface conformability.
Advanced Seating Design: Precision-machined tangs and dimensions ensure the bearing shells lock firmly into the rod, preventing spinning even under extreme RPMs.
Superior Oil Retention: The specialized surface finish is designed to maintain a consistent oil film, reducing friction during the high-pressure transition from the compression to the power stroke.
Enhanced Fatigue Strength: The heavy-duty overlay is specifically formulated to resist the flaking and pitting that typically occur in high-hour industrial engines.
Improved Heat Dissipation: Superior thermal conductivity allows these bearings to move heat away from the journal quickly, preventing localized oil breakdown.
Crush-Fit Precision: Each shell is manufactured to provide the perfect "crush," ensuring maximum contact with the rod bore for efficient heat transfer and stability.

$34.00

CON ROD BEARING STD, SAWCUT CON. RODS

The CON ROD BEARING STD, SAWCUT CON. RODS from Enhanced Power Products deliver exceptional crankshaft protection to commercial trucks facing severe load demands.

Key Technical Features

Saw Cut / Machined Split: These bearings are intended for connecting rods that are machined at the cap joint rather than fracture-split.
Drilled Oil Hole: The design includes a lubrication hole in the upper shell only. The lower shell is solid, which directs the oil flow precisely where needed in the rod assembly.
Material Composition: Often constructed from high-strength, premium alloys designed to resist wear, friction, and heat. They typically feature a sintered tri-metal structure (copper/lead/tin) with a nickel dam and babbitt top layer for enhanced fatigue resistance.
Standard Size (STD): This part number refers to standard-sized bearings, suitable for engines within OEM specifications.
Application:These are typically used in pairs (one upper and one lower shell) with one pair per rod.

Your engine's bottom end bears the brunt of intense combustion forces, meaning that inferior journal lining can lead to catastrophic crank friction and sudden, expensive block damage. Upgrading with these advanced diesel engine parts provides a multi-layered lining that easily absorbs micro-debris while maintaining a reliable hydrodynamic oil film.

Integrating these high-durability Cummins engine parts into your lower-end rebuild protects your connecting rods from spinning out of alignment under heavy boost. These heavy-duty Cummins performance parts utilize specialized steel backings that refuse to deform under peak cylinder pressures. Furthermore, opting for these premium Cummins rod bearings ensures precise oil clearance, directly preventing the metal-on-metal contact that ruins crankshaft journals. This engineering gives your hardworking commercial rig the mechanical resilience needed for uncompromised, long-haul reliability.

Compatibility and Specifications

Engine Model: Cummins ISX, (single cam and dual cam).
Rod Type: Exclusively for Saw-Cut / Drilled Type connecting rods.
Usage: Commonly used in heavy-duty truck, industrial, and agricultural machinery applications.

$20.00

CUMMINS ISX 870 INJECTOR CAMSHAFT

A high-performance, critical engine component designed specifically for the injector side of Cummins ISX/QSX 15-liter engines with dual overhead camshafts (DOHC).

Key Technical Specifications

Engine Type: Cummins ISX,(15.0 Liter)

Application: Injector side (Dual Camshaft Engines)

Material: Forged Billet Steel

Hardness:55rc (Meets or exceeds OEM specifications)

Engine Year Range: 1997-2010 (Primarily EPA02/CM87)

Restoring precise injection timing is absolutely essential if you want to recover your heavy-duty truck's lost fuel economy and cold-start responsiveness. Over time, original lobes can flatten out, leading to sluggish acceleration, increased smoke, and unburned fuel washing down your cylinder walls. Swapping out your worn component with this precision-ground unit ensures your fuel injectors fire exactly when needed under extreme combustion pressures. Upgrading with these rugged diesel engine parts protects your entire valvetrain from premature wear and expensive progressive damage. Selecting high-grade Cummins engine parts ensures factory-spec geometry and seamless integration with your existing roller rockers. Investing in top-tier Cummins performance parts gives your commercial rig the structural durability required to withstand millions of demanding highway miles. Choosing premium Cummins camshafts safeguards your operation against sudden, costly road failures. Installing a brand new CUMMINS ISX 870 INJECTOR CAMSHAFT from Enhanced Power Products delivers the ultimate blend of long-haul reliability and optimal engine efficiency. Order today.

Key Features and Benefits

Superior Durability: The forged billet steel construction ensures high fatigue resistance, which is crucial for managing the intense stress placed on the injector train in heavy-duty diesel engines.

Precision Engineered: Manufactured to meet or exceed OEM specifications for lobe profile, lift, and duration, ensuring optimal fuel injection timing and engine performance.

Exact Fit for DOHC Engines: Specifically designed for the DOHC head configuration, where one cam operates the valves and the other operates the injectors.

High-Temperature Performance: Designed to maintain hardness and structural integrity under high operating temperatures, reducing the risk of premature cam lobe failure.

$1,100.00

CUMMINS ISX CM570/870/87 CAMSHAFT SET

Complete new set of ISX rocker arms with valve and injector rockers. Made with premium hardened rollers, comes with new adjuster screw and nut.

Fits CM870, CM871, CM570

Kit Includes:

3100776 Injector Rocker Lever Assy. (Qty x 6)
4059410 Front Exhaust Rocker Arm (Qty x 3)
4059413 Rocker Lever Assy. Rear (Intake) (Qty x 3)
4059412 Rocker Lever Assy. Rear (Intake) (Qty x 3)
4059411 Rear Exhaust Rocker Lever (Qty x 3)
139-0538 Injector Camshaft (Qty x1)
429-8626 Valve Camshaft (Qty x 1)

Upgrading your dual overhead cam setup is critical to maximize your heavy-duty truck's valvetrain efficiency and eliminate expensive downtime. This comprehensive kit includes both the valve and injector camshafts alongside high-grade rocker arms featuring premium hardened rollers, ensuring seamless integration and prolonged service life. Investing in top-tier diesel engine parts protects your engine block from premature wear while restoring your rig's factory torque and overall fuel efficiency. By choosing premium Cummins engine parts, you safeguard your commercial vehicle against the common flattening of lobes and rolling failures that plague older configurations. Secure the ultimate blend of durability and precision engineering to confidently tackle demanding cross-country hauls with optimal valvetrain timing. Order today.

Precision-engineered Cummins performance parts deliver superior throttle response and exceptional reliability under heavy towing loads.
Drop-in replacement Cummins camshafts fit CM570, CM870, and CM871 platforms seamlessly without modification.
Investing in the complete CUMMINS ISX CM570/870/87 CAMSHAFT SET from Enhanced Power Products ensures long-term operational success.

$4,200.00

CUMMINS ISX CM570/870/87 ROCKER SET

Complete new set of ISX rocker arms with valve and injector rockers. Made with premium hardened rollers, comes with new adjuster screw and nut.

Fits CM870, CM871, CM570

Kit Includes:

3100776 Injector Rocker Lever Assy. (Qty x 6)
4059410 Front Exhaust Rocker Arm (Qty x 3)
4059413 Rocker Lever Assy. Rear (Intake) (Qty x 3)
4059412 Rocker Lever Assy. Rear (Intake) (Qty x 3)
4059411 Rear Exhaust Rocker Lever (Qty x 3)

Maximizing your heavy-duty truck's valvetrain efficiency relies on ensuring every component can handle extreme combustion pressures without flexing or failing. This premium kit replaces your worn components with heavy-duty valve and injector rocker arms engineered to resist scuffing and bushing wear. Upgrading to these rugged diesel engine parts restores exact valve lift and precise injection timing, giving you back lost fuel economy and engine responsiveness. By choosing these specialized Cummins engine parts, you protect your camshaft lobes from uneven friction and eliminate the costly ticking noises associated with valvetrain slack. Investing in high-durability hardware keeps your commercial fleet on the road longer between service intervals, meaning less downtime and more profitable miles. Order today.

High-strength Cummins performance parts provide the ultimate structural integrity needed to survive demanding long-haul conditions and high boost levels.
Advanced oiling channels within the design ensure continuous lubrication to reduce heat buildup and prevent premature component failure.
Installing the complete CUMMINS ISX CM570/870/87 ROCKER SET from Enhanced Power Products delivers factory-spec geometry for seamless operation.

$2,110.00

CYLINDER HEAD GASKET SET

Key Features and Specifications

Engine Compatibility: Designed for 48-valve engines Caterpillar 3406E, C15, and C16 engine configurations.
Engine Serial Number (ESN) Specific: Compatibility can vary based on the specific serial number of the engine.
Construction: High-quality, durable materials designed to maintain compression and prevent leaks of oil and coolant.
Brand Type: IPD
Fits: Gasket set that precisely fits Prefix 5EK, 6TS, 5DS, 1LW, 2WS, 1MM engine models.

Components

Cylinder Head Gasket(s): Primary, heavy-duty gaskets designed to withstand extreme combustion pressures.
Exhaust Manifold Gaskets: High-temperature gaskets to seal the exhaust ports.
Intake Manifold Gaskets: To seal the intake system.
Valve Cover Seals/Grommets: To prevent top-end oil leaks.
Valve Stem Seals: To ensure proper lubrication control.
O-rings and Seals: Various, essential seals for oil and coolant passages.

$410.00

CYLINDER HEAD GASKET SET

Key Features and Specifications

Engine Compatibility: Designed for Caterpillar C15 48-valve engines.
Engine Serial Number (ESN) Specific: Compatibility can vary based on the specific serial number of the engine.
Construction: High-quality, durable materials designed to maintain compression and prevent leaks of oil and coolant.
Brand Type: IPD
Fits: Gasket set that precisely fits Prefix 6NZ, MBN, engine models.

Components

Cylinder Head Gasket(s): Primary, heavy-duty gaskets designed to withstand extreme combustion pressures.
Exhaust Manifold Gaskets: High-temperature gaskets to seal the exhaust ports.
Intake Manifold Gaskets: To seal the intake system.
Valve Cover Seals/Grommets: To prevent top-end oil leaks.
Valve Stem Seals: To ensure proper lubrication control.
O-rings and Seals: Various, essential seals for oil and coolant passages.

$597.00