Home > Turbos
Sort By:
Page of 1
Caterpillar S430sx 78mm Turbo Caterpillar S430sx 78mm Turbo

Caterpillar 3406/C15/C16 Direct Drop In Replacement
78x96x132 Non Waste Gated Housing
FMW Compressor Wheel
Recommended: 475-650hp

Expect to see:

  • Increased airflow and enhanced EGT control
  • 100-200 degree decrease in EGTs
  • 5lbs increase in boost pressure versus the stock turbo
  • This turbo is very well suited for the everyday truck owner who wants or needs to replace his turbo for applications that are completely stock or very mild HP upgrades. We use this turbo often in the shop and find that it spools just as well as the stock turbo that comes out on the C15/3406E engines. I would recommend if you are using this turbo about 650hp is as hard as I like to push it for everyday use, that usually equates to about 42 to 43lbs of boost. Turbo life seems to be shortened if the turbo is pushed past this limit for everyday use. A good way to tell if you are exceeding the turbo's long term reliability is when you split a gear or change gears, if the turbo barks or back spools a large percentage of the time then you should upgrade to the 988-0001 turbo. The Borg warner turbos with the FMW are a extremely tough charger but barking the turbo on a consistent basis will cut down on its life extensively..



Our Price: $1,770.00
Caterpillar S430sx 80mm Turbo Caterpillar S430sx 80mm Turbo

Caterpillar 3406/C15/C16 Direct Drop In Replacement
80x96x1.58 Non Waste Gated Housing
FMW Compressor Wheel
Recommended: 550-750hp

Expect to see:

  • Increased airflow and enhanced EGT control
  • 100-200 degree decrease in EGTs
  • 5lbs increase in boost pressure versus the stock turbo



Our Price: $1,800.00
Bullseye Power TCT Performance Turbo Bullseye Power TCT Performance Turbo

Caterpillar 3406/C15/C16
Non Waste Gated Housing
FMW Triple Compression Technology
Recommended: 550-850hp

Expect to see:

  • Increased airflow and enhanced EGT control
  • 100 degree decrease in EGTs over standard FMW Compressor Wheel
  • 3-5lbs increase in boost pressure versus standard FMW Compressor Wheel
  • Agressive compressor wheel design for more power sooner in the RPM band

At our shop, we have found that this turbo works great for everyday line haul applications as well as performance based engines looking for the most power to size ratio turbos we have tested. We have also found that this turbo has spooling characteristics of chargers significantly smaller in size and out flows chargers much larger in size that have standard or FMW compressors.

This price is for the following housings: 1.32,1.45 or 1.58. Custom Options Available Upon Request. Contact Us for More Info.

Our Price: $3,000.00