Caterpillar truck parts, enhanced power products, enhanced power product

INFRAME DUAL CAM KIT SAW CUT BEARINGS

This Kit Contains:

3678756 – SEAL, O-RING (x 1)

3820320 – PLUNGER, BYPASS VALVE (x 1)

4026684 – GASKET, OIL PAN (x 1)

4089405 – CON ROD BEARING,STD,SAWCUT CON RODS (x 6)

4309389 – LINER KIT, 150MM O.D. (x 6)

4352145 – GASKET SET, UPPER 48 (x 1)

5406110 – REFER TO 3800298 (x 1)

PKISXLC – PISTON KIT,NON-APR***NO WARRANT OFF HIGHWAY USE*** (x 6)

2881756 – RING GROUP (x 6)

$3,914.00

INFRAME KIT X15 CUMMINS

Key Features of the KIF5828-87 Kit

Forged Steel Pistons: The kit includes 6 OEM quality, friction-welded steel pistons. These feature a manganese phosphate coating for maximum oil retention and long service life.
Anti-Polish Ring (APR) Liners: The 150mm cast iron cylinder liners are equipped with an anti-polish ring, which helps prevent carbon buildup, reducing liner polish and maintaining engine efficiency.
Engineered for Performance: The pistons utilize a unique pin bore profile designed to optimize pin joint performance and reduce wear.
No Core Charge/Returns: This kit consists of brand-new, non-remanufactured parts, eliminating the hassle and cost of core returns.
Standard Sizing: Specifically tailored for engines using saw fractured rods, providing a perfect, reliable fit for Cummins X15.

This Kit Contains:

2882087 – CON ROD BEARING,STD, FRACTURED CON. RODS (x 6)

3678756 – SEAL, O-RING (x 1)

3684336 – GASKET (x 1)

3689587 – STUD, TURBO CHARGER MOUNTING (x 4)

4026684 – GASKET, OIL PAN (x 1)

4298975 – NUT, TURBO CHARGER MOUNTING (x 4)

4318947 – REGULATOR (x 1)

4357177 – PRESSURE RELIEF VALVE (x 1)

5405828 – PISTON KIT (x 6)

5406110 – REFER TO 3800298 (x 1)

5406187 – GASKET SET, UPPER 48 (x 1)

5472970STL – LINER KIT, 150MM APR STEEL (x 6)

$4,667.00

INFRAME KIT X15 CUMMINS

Key Features and Benefits

Engineered for Durability: Features 2-piece forged friction-welded steel pistons, designed to handle the high heat and cylinder pressures of the X15 engine.
Anti-Polish Liners (APR): Includes 150mm cast iron liners with an anti-polish ring that prevents carbon buildup on the piston, reducing liner polishing and improving oil consumption.
Performance Coatings: Pistons are coated with manganese phosphate for corrosion resistance and a graphite skirt coating to reduce friction during startup and operation.
Optimized Performance: Features a unique pin bore profile developed by IPD to enhance pin joint performance and longevity.
Reduced Downtime: An in-frame design means the engine block does not need to be removed from the truck, cutting labor time and costs.

This Kit Contains:

2882087 – CON ROD BEARING,STD, FRACTURED CON. RODS (x 6)

3678756 – SEAL, O-RING (x 1)

3684336 – GASKET (x 1)

3689587 – STUD, TURBO CHARGER MOUNTING (x 4)

4026684 – GASKET, OIL PAN (x 1)

4298975 – NUT, TURBO CHARGER MOUNTING (x 4)

4318947 – REGULATOR (x 1)

4357177 – PRESSURE RELIEF VALVE (x 1)

5405829 – PISTON KIT (x 6)

5406110 – REFER TO 3800298 (x 1)

5406187 – GASKET SET, UPPER 48 (x 1)

5472970 – LINER KIT, 150MM APR (x 6)

$4,667.00

INFRAME OVERHAUL KIT

This Kit Contains:

1979326 – RETAINER (x 12)

1979327 – PISTON PIN (x 6)

2110587 – MAIN BEARING STD (x 4)

2110588 – MAIN BEARING STD (x 3)

2463144 – THRUST PLATE (x 2)

2920484 – BEARING, CONNECTING ROD STD (x 6)

3889356SP – PISTON,IPDSTEEL WELDED (x 6)

4371409 – SEAL-LINER (x 4)

4695315 – LINER (x 6)

C13022NLS – GASKET SET, IN-FRAME 48 (x 1)

C13RS2 – RING SET (x 6)

$3,674.00

INFRAME OVERHAUL KIT

This Kit Contains:

1979322CSWS – LINER WITH SEALS, CREVICE TYPE (x 6)

2502940 – RETAINER, PISTON PIN (x 12)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

3569946 – PISTON,IPDSTEEL,WELDED (x 6)

C15012NLS – GASKET SET, IN-FRAME 48 (x 1)

C15RS5 – RING SET (x 6)

2613450 – CON ROD BEARING STD (x 6)

5245565 – PISTON PIN (x 6)

1685248 – SEAL-ISOLATION (x 1)

$4,584.00

INFRAME OVERHAUL KIT, STEEL PISTON & CS LINER

This Kit Contains:

1326663 – PISTON SKIRT (x 6)

1687246 – PISTON PIN (x 6)

1777496RS – RING SET (x 6)

1807352 – PISTON CROWN, IPDSTEEL (x 6)

1979322CSWS – LINER WITH SEALS, CREVICE TYPE (x 6)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

7E1177 – RETAINER, PISTON PIN (x 12)

9Y7735G – CON ROD BRG STD GROOVED (x 6)

C15002NLS – GASKET SET, IN-FRAME 48 (x 1)

1685248 – SEAL-ISOLATION (x 1)

To ensure the correct fit, it is recommended to confirm the engine's serial number with a parts expert before purchase.

Fits 6nz/mbn 16:6.1 cr

$3,926.00

IPD 3406B Enhanced Durability Kit

1 piece aluminum piston to a 2 piece piston design with a steel crown for enhanced durability.

To make this kit work properly in a 3406B on highway engine, the single tube cooling jets need to be upgraded to dual tube cooling jets. As well as, the oil pump pressure spring retainer. See notesbelow for parts numbers.

This Kit Contains:

1630930 – PISTON SKIRT (x 6)

1979314 – PISTON CROWN, IPDSTEEL (x 6)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

406062NLS – GASKET SET, IN-FRAME 48 (x 1)

7E5665 – RETAINER, PISTON PIN (x 12)

8N1608 – PISTON PIN (x 6)

9Y9497G – CON ROD BRG STD GROOVED (x 6)

1979322CSWS – LINER WITH SEALS, CREVICE TYPE (x 6)

3400RS5 – RING SET (x 6)

Note: You must increase oil pump relief valve pressure setting on your existing 480 kPa (70 psi) engine oil pump by replacing the 9Y-1800 Retainer with a new 9Y-1792 Retainer.

Note: There are two different sizes of cooling jets. Use the 166-3650 Piston Cooling Jet and the 111-8606 Special Bolt for a 3/8-16-2A thread hole. Use the 277-3076 Oil Jet Tube As and the 151-5925 Bolt for a 7/16-14-2A thread hole.

Warranty:
No Warranty offered with this product. Off Highway Use Only.

Shipping:
Free shipping to business address

$3,750.00

IPD 3406C Enhanced Durability Engine Kit

3406C 1 piece aluminum piston to a 2 piece piston design with a steel crown for enhanced durability. This kit is a 14.6:1 compression ratio.

This Kit Contains:

2531752 – THRUST PLATE (x 2)
3178766 – MAIN BEARING, STD (DIESEL) (x 7)
1258869 – PISTON CROWN, IPDSTEEL (x 6)
1300241 – PISTON SKIRT (x 6)
1687246 – PISTON PIN (x 6)
1W8922 – RING GROUP (x 6)
406272NLS – GASKET SET, IN-FRAME 48 (x 1)
7E1177 – RETAINER, PISTON PIN (x 12)
9Y7735G – CON ROD BRG STD GROOVED (x 6)
1979322CSSPWS – LINER SPECIAL WITH SEALS (x 6)

Key Features and Specifications

Engine Compatibility: Caterpillar 3406C.

Piston Type: Enhanced durability 2-piece articulated piston (steel crown with aluminum skirt).

Compression Ratio: 14.6:1.

Piston Crown Number: 1258869 (Shallow Bowl).

Application: Ideal for industrial applications (designed based on 600 HP industrial specs).

Usage Notice: Often sold as Off-Highway Use Only.

Cost-Effective Overhaul: Provides all essential components in one package.

Note:

*You must increase oil pump relief valve pressure setting on your existing 480 kPa (70 psi) engine oil pump by replacing the 9Y-1800 Retainer with a new 9Y-1792 Retainer.

Note:

*There are two different sizes of cooling jets. Use the 166-3650 Piston Cooling Jet and the 111-8606 Special Bolt for a 3/8-16-2A thread hole. Use the 277-3076 Oil Jet Tube As and the 151-5925 Bolt for a 7/16-14-2A thread hole.

Warranty:

No Warranty offered with this product. Off Highway Use Only.

Freight Shipping:

$250

$4,199.00

$3,800.00

IPD 3406E 1 Piece Steel Piston In-Frame Kit

This kit replaces the 2 piece articulated piston design to a 1 piece steel piston similar to the piston used in a C15 Acert. The pistons in this kit are more durable compared to the 2 piece design for applications where cylinder scuffing is more likely to occur. We highly recommend this kit for any rebuild for over the road or high performance applications.

Core Purpose and Upgrades

Engine Fitment: Primarily fits Caterpillar C15 and 3406E engines (15.2L). Specifically Prefixs 5EK, 6TS, 1LW, 2WS, 6NZ, MBN,
Piston Upgrade: Converts engines from traditional articulated (two piece) pistons to a 1-piece steel piston design, which offers improved strength and longevity.
Compression Ratio: The pistons in this kit typically maintains a 16.6:1 compression ratio, matching the original specs for a drop-in replacement.
Liner Design: Uses specialized cylinder liners to help prevent scuffing and improve sealing.

We have used this kit in engines from stock to 1100 HP without a single piston failure.

This Kit Contains:

1687246SP – PISTON PIN, SPECIAL (x 6)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

7E1177 – RETAINER, PISTON PIN (x 12)

9Y7735G – CON ROD BRG STD GROOVED (x 6)

C15RS5 – RING SET (x 6)

IPDSPC15W – SPECIAL C15 STEEL WELDED PISTON (x 6)

C15002SPNLS – GASKET SET, IN-FRAME 48 (x 1)

1685248 – SEAL-ISOLATION (x 1)

1979322CSSPWS – LINER SPECIAL WITH SEALS (x 6)

Key Advantages

Durability: The 1-piece steel piston is designed to handle extreme loads better than multi-piece alternatives.
Reduced Scuffing: The specialized liner design reduces common failure points.
Drop-in Replacement: Requires no major alterations or modifications to the engine block for installation.

Warranty:
No Warranty offered with this product. Off Highway Use Only.

Shipping:
Free shipping to business address

$5,400.00

$4,750.00

IPD Acert 18:1CR In-Frame Kit

1 piece steel piston, Recommended hp: 475-550

Factory compression ratio 18.1

This Kit Contains:

1979322CSWS – LINER WITH SEALS, CREVICE TYPE (x 6)

2502940 – RETAINER, PISTON PIN (x 12)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

3564787 – PISTON, IPDSTEEL, WELDED (x 6)

C15012NLS – GASKET SET, IN-FRAME 48 (x 1)

C15RS5 – RING SET (x 6)

2613450 – CON ROD BEARING STD (x 6)

5245565 – PISTON PIN (x 6)

1685248 – SEAL-ISOLATION (x 1)

$4,408.00

IPD BRAND INFRAME KIT 3406E

The IPD KIF5566-462-CS is a premium in-frame overhaul rebuild kit specifically designed for the Caterpillar 3406E diesel engine, tailored for models with 5EK, 6TS, 1LW, and 2WS engine serial numbers (ESNs). This kit focuses on heavy-duty performance.

This Kit Contains:

1300241 – PISTON SKIRT (x 6)

1495566 – FORGED STEEL PISTON CROWN, IPDSTEEL (x 6)

1687246 – PISTON PIN (x 6)

1979322CSWS – LINER WITH SEALS, CREVICE TYPE (x 6)

1W8922 – RING GROUP (x 6)

2531752 – THRUST PLATE (x 2)

3178766 – MAIN BEARING, STD (DIESEL) (x 7)

406462NLS – GASKET SET, IN-FRAME 48 (x 1)

7E1177 – RETAINER, PISTON PIN (x 12)

9Y7735G – CON ROD BRG STD GROOVED (x 6)

$3,775.00

IPD Low Compression Acert 16:1CR Conversion In-Frame Kit

Core Purpose and Applications

Engine Model:Caterpillar C15 ACERT (commonly BXS, MXS, NXS applications).
Primary Function: Converts 18:1 high-compression twin-turbo setups to a more robust 16:1 low-compression ratio.
Use Case:Highly popular for heavy-haul, rugged terrain, and off-highway applications looking to reduce stress and increase longevity.

This Kit Contains:

250-2940 – RETAINER, PISTON PIN (x 12)
253-1752 – THRUST PLATE (x 2)
317-8766 – MAIN BEARING, STD (DIESEL) (x 7)
346-6615 – PISTON, IPDSTEEL, WELDED (x 6)
C15RS6 – RING SET (x 6)
C15982NLS – GASKET SET, IN-FRAME,INDUSTRIAL 48 (x 1)
261-3450 – CON ROD BEARING STD (x 6)
524-5565 – PISTON PIN (x 6)
168-5248 – SEAL-ISOLATION (x 1)
1979322CSSPWS – LINER SPECIAL WITH SEALS (x 6)

Key Technical Features

Low Compression Ratio (16:1): Reduces cylinder pressure, which can minimize failures associated with high-compression setups.
Crevice Seal Design: The included liners help secure the seal in high-vibration environments.
IPD Specialization: Features IPD's proprietary steel piston technology for enhanced durability.
In-Frame Design: Components are designed to be installed without removing the engine block from the machine.

*No Warranty offered with this product. Off Highway Use Only.

$4,850.00

ISX CUMMINS 2250 CAMSHAFT

The ISX CUMMINS 2250 CAMSHAFT from Enhanced Power Products provides commercial drivers with a rugged solution to combat the premature lobe wear that frequently cripples late-model emissions engines.

Key Specifications & Features

Description: Single Overhead Cam (SOHC) featuring an updated wide lobe design. The lobes are often crowned to enhance durability and performance.
Lobe Width: Standard specifications for this design typically feature a 20mm lobe width
Material: Forged from billet steel rather than cast iron to ensure maximum resistance and a hardness.
Performance Impact: Engineered to optimize valve timing and engine efficiency, which can lead to improved fuel economy.

Maintaining strict control over your valve actuation is crucial for maximizing your torque curve while pulling heavy freight. Technicians primarily utilize this robust component during high-mileage cylinder head rebuilds to correct improper valve seating and eliminate frustrating check engine lights. Fleet managers deploy these durable diesel engine parts to handle the increased soot loading and higher operating temperatures common in modern working rigs.

Relying on premium Cummins engine parts ensures your commercial investment stays out of the service bay and on the highway. These specialized Cummins performance parts are forged to withstand intense overhead pressure, making them ideal for severe-duty applications. Incorporating resilient Cummins camshafts into your maintenance routine guarantees precise timing and optimized fuel delivery. This critical upgrade delivers the reliable, long-term mechanical stamina your business demands.

Compatibility & Applications

Engine Fitment: Specifically for 2010–2017 Cummins ISX15 engines.
Vehicle Types: Found in heavy-duty trucks, commercial vehicles, and industrial equipment.

$1,100.00

ISX CUMMINS CAMSHAFT

The ISX CUMMINS CAMSHAFT from Enhanced Power Products offers long-haul truckers a definitive solution to the costly lobe degradation that frequently paralyzes heavy-duty operations.

Key Specifications & Applications

Engine Fitment: Specifically for ISX engines with a Single Overhead Cam cylinder head.
Performance Use: Frequently used as a "High Lift" performance upgrade, especially for engines where Variable Geometry Turbochargers (VGT) have been removed. It can restore up to 75% of engine braking power lost during VGT removal.
Compatibility: It is primarily compatible with CM2250 and CM2350 engine models.
Physical Specs: Approximately 50 inches long and weighs roughly 65 lbs.

Engineered with deep case-hardening, this component showcases an aggressive profile design that maximizes airflow while significantly minimizing rolling resistance against your rocker assemblies. These distinct physical characteristics ensure your valvetrain maintains exact timing under immense thermal strain. Choosing these premium diesel engine parts shields your cylinder head from micro-pitting and progressive structural wear.

Integrating these heavy-duty Cummins engine parts into your scheduled overhaul ensures a perfectly balanced rotation that eliminates internal harmonic vibrations. Order today.

Outstanding metallurgical density allows these Cummins performance parts to resist surface flaking during high-torque, low-RPM hill climbs.
Ground to strict microscopic tolerances, these Cummins camshafts ensure your exhaust and intake valves seat completely with every cycle.
Optimized oil-groove engineering guarantees continuous lubrication, providing a robust defense against localized friction spikes.

Customers that have given great feedback on this camshaft.

$1,100.00

ISX Cummins One Piece Exhaust Manifold

Upgrade your exhaust system with high-quality Cummins exhaust manifolds from Enhanced Power Products. If you need durable and efficient diesel engine parts, our manifolds are key Cummins performance parts designed specifically for your ISX truck engine.

The exhaust manifold is critical for efficiently channeling hot gases from the cylinders to the turbocharger. Our manifolds are built with superior characteristics, featuring heavy-duty construction and precision machining to prevent cracking, warping, and leaking, common issues with inferior engine parts. This robust design ensures an optimal seal and consistent gas flow, which is essential for maximizing turbocharger spool-up and power output.

Cracking Elimination: This rigid, one-piece design removes the slip joints that often leak or fail, providing a permanent solution to common exhaust issues.
Superior Metallurgy: Cast from high-quality materials, this manifold resists extreme thermal cycling and prevents the warping found in stock units.
Improved Turbo Spool: The smooth internal runners enhance exhaust flow velocity, allowing your turbocharger to respond faster under heavy loads.

Selecting the right ISX one-piece Exhaust Manifold Kit from Enhanced Power Products is the best way to ensure your engine breathes efficiently. When you shop for Cummins parts online, you need CUMMINS engine parts that can survive the heat. This manifold is best for the long-haul trucking industry, heavy construction fleets, and agricultural operators who demand maximum durability and zero downtime from their equipment.

By reducing backpressure and improving exhaust scavenging, our manifolds contribute directly to better engine breathing and fuel efficiency. When you shop for semi truck parts online, choose our heavy diesel specialists for reliable components that deliver long-term performance and help reduce maintenance downtime for your commercial vehicle.

Bolting the ISX Cummins One Piece Exhaust Manifold from Enhanced Power Products onto your cylinder head completely eliminates the persistent gasket leaks and cracked center sections that plague multi-piece factory designs. Traditional multi-piece setups expand and contract unevenly, eventually warping or shearing off your mounting bolts under extreme exhaust temperatures. This solid, heavy-duty casting features an optimized interior flow path that maximizes turbocharger spool-up while rapidly drawing heat away from your exhaust ports. Choosing these premium diesel engine parts ensures your commercial rig maintains the solid backpressure control needed for heavy mountain pulling.

Integrating these rugged Cummins engine parts into your overhaul guards your valvetrain against power-robbing exhaust leaks. These high-grade Cummins performance parts offer the structural integrity necessary to withstand brutal long-haul cycles. Furthermore, upgrading to these specialized Cummins manifolds ensures your truck runs cleaner and more efficiently. Shopping with us guarantees you receive fully inspected, premium hardware backed by unparalleled industry expertise and rapid nationwide shipping. Order today.

Enhanced Port Matching: Precision-machined flanges ensure an exact fit to your cylinder head, maximizing the efficiency of your Cummins exhaust manifolds.
Lower EGTs: By optimizing exhaust gas scavenging, this kit helps lower operating temperatures, making it a vital part of your Cummins engine performance parts collection.

Buy today while they are in stock!

$1,400.00